Database Monitoring
Database monitoring Database monitoring - DB check for access and regular execution of the specified query.

Database monitoring feature allows to run a query during every check and react in the appropriate way on the result. Also, it is possible to check just possibility to connect to DB - by ignoring the query field. To set the monitoring, fill the connection data: DB server address, port, database name, login and password of a user for connection. We strongly recommend to create the new user with limited rights. However, do not forget to provide him enough rights for performing the supposed actions. Also, it is necessary to add HostTracker servers addresses, to the whitelists on firewall or other blocking software, to allow the access. The addresses are permanent, and are listed on the same form.

Create ContentCheck Task

There could be arbitrary query - SELECT, UPDATE, DELETE, INSERT, execution of stored procedures (like scheduler), results comparison, logical operations. The only restriction is execution time - it should not take longer than 30 seconds. Otherwise, the timeout error will be reported.

It is recommended to create the queries which display the necessary value in the first row of the first column. This result can be analysed. For UPDATE, INSERT, DELETE queries the number of affected rows is analysed. There are different ways to analyse the resulted value by comparison with specific preset - equal/not equal/higher/lower/in range. In case the condition is not satisfied, no connection to DB, query timeout - the error is reported.

Create ContentCheck Task
  • CM.Glossary.WebsiteMonitoring
  • CM.Glossary.ContentCheck
more glossary
"Independent verification of website availability is valuable. Let's us support our customers better."
- M.
Shellshock vulnerability online check

Considering the recently discovered Shellshock vulnerability, HostTracker has created a tool for testing it.

Check your server for vulnerability

How does it work?

It is developed for a Linux server with a web server installed on it. The algorithm is very simple. We consequently generate 4 http requests:

  • 1. Ordinary request
  • 2. The request tries, using vulneratility, post a "harmful" cookie which causes 2-seconds delay in respond to our special http request.
  • 3. The request tries, using vulneratility, post a "harmful" cookie which causes 4-seconds delay in respond to our special http request.
  • 4. Same as #3


Results of the test

How to understand the result?

We compare response time for all 4 requests. Three situation are possible:

  • 1. Vulnerability found. We may affirm that if the difference in responses is about 2 seconds for requests without cookie and with 2-second-delay cookie, as well as for requests with 2 and 4-second delay cookie. It means that our request was able to use the vulnerability and set these cookies.
  • 2. Vulnerability not found. All the requests have about the same response time. The cookies, likely, were not installed because there is no vulnerability.
  • 3. Uncertain situation. If the response time differs widely, without coincidence with preset by cookies delay, we can not say for sure. It could be if the server is under high load. To check this, we use two requests with same cookies (#3 and #4). If the response time for two same checks varies, we make a conclusion that the response time is not affected by cookies. At least, not only by them. So in this case our method can not detect vulnerability

Safety of checks

Our test can not damage your server. The risk consists of appearance of one extra-cookie, which is used only for our requests and can not affect normal work-flow of your site.

more blog
Thank you for feedback!
 
Sign In
Sign Up
Prices & packages
Our monitoring network
Home > Glossary > Ping
Ping (ICMP) Ping is request message for protocol ICMP.

Ping is request message for ICMP (stands for Internet Control Message Protocol). This protocol is used by different network devices to check if a service or a device is available. Usually it is used for network diagnostics.

Ping monitoring allows you to keep an eye on your network infrastructure. Ping failure means broken connection to a network entity. It is handy to use Ping together with HTTP monitoring. In this case, you get additional information - for example, you know if the error is site-related, or the whole server has gone down. However, sometimes ICMP could be blocked for incoming requests, in order to prevent ddos attacks.

  • CM.Glossary.WebsiteMonitoring
  • CM.Glossary.Downtime
  • CM.Glossary.DistributedMonitoring
  • CM.Glossary.HTTP
Share:
Send to Twitter Send to Facebook Send to LinkedIn Share on Google+
Blogs:
HostTracker blog HostTracker page on Facebook